Log In or
Enter your e-mail address to receive our newsletter
Laboratory glass adapters are used to connect dissimilar standard joint sizes glassware.
An outer Joint at one end and with an inner joint of the same size at the other end.
An outer joint at top with an inner joint of the same size on the bottom and on the side.
With outer joints at top and side, with an inner joint at bottom.The side arm is at a 105° angle from …
Top tooled to accommodate a thermometer. Bottom inner and side joints are the same.
Outer joint size 10/30 at top to accommodate a thermometer. Bottom inner and side joints are the sam…
Top internal thread # 7 with bushing and o-ring to accommodate thermometer. Bottom inner & side joints are …
Top internal thread #7 with bushing and O-ring to accommodate a thermometer. Side outer joint and bo…
Inner Joints of the same size at both ends.
Inner joint with 2 mm Glass stopcock and a 90° angle hose connection.
Inner joint with 2 mm Teflon stopcock and a 90° angle hose connection.
Copyright © 2013 - Crystal Science USA
eCommerce by CubeCart